Canon PIXMA MX700 Serie Guía De Configuración página 16

If "Communication with the Card Slot failed." is
displayed, click Retry. If it still fails, click Skip to
complete the setup. Then try the network setup of
the Card Slot using the Canon IJ Network Tool.
Note
If "Cannot map any more drives, because all the
drive letters are assigned." is displayed, click Skip
to complete the setup. After software installation is
complete, remove any drive letter and try the
network setup of the Card Slot again using the
Canon IJ Network Tool. For details, refer to "Using
the Card Slot over a Network" in the User's Guide
on-screen manual.
If "The Card Slot is already mapped as Network
Drive to this computer." is displayed, the Card Slot
is already set up. Click OK, then click Next.
6
When the Setup Completion dialog box
appears, click Finish.
The network connection between the machine and
the computer is now successfully established.
7
When the Setup Complete screen appears,
click Next.
8
When the User Registration screen
appears, click Next.
Note
If you have already registered your product,
click Cancel.
It is required to connect to the Internet to
register your product. Turn on the firewall
function before connecting your network to the
Internet.
To register later, click Cancel and go to step 9.
After software installation is complete, double-
click on the desktop.
The User Registration screen may not be
displayed depending on the country or region of
purchase.
14