**max. preparation quantity 300 ml
***washed and cooked
Time delay
You can pre-set the device to prepare the drink at a later time.
1.
Just select the program and capacity
2.
Press "Timer" button. By pressing the button several times, you can increase
the pre-set time in steps of 30 minutes, from 30 minutes up to a max. of 24 hours.
The pre-set time is 8 hours. The program is then completed after 8 hours.
3.
Select the program. For safety reasons, the "Soaked Soy" and "Juice"
programs are not included.
4.
Fill in the ingredients and press "Start/Stop".
5.
You can stop the program and delay the time by pressing the "Start/Stop"
button again during the first minute. Now you can make a new selection.
Warning: If the room temperature exceeds 30°C, do not set the timer at over 12
hours to prevent germs.
Cleaning and care
Cleaning
The device come with one automatic and two
manual self-cleaning modes. This makes cleaning
a breeze.
1. After every program, Mila automatically
switches on the self-cleaning mode. The cleaning
takes 7 minutes. The device only needs water to
clean herself. After the end of the self-cleaning
process, open the lid to allow the mixing chamber
to dry.
2. You can also directly select the cleaning mode
via the display, for example after not using the
device for a longer period of time, after preparing a