Oase SwimSkim 25 Instrucciones De Uso página 13

Assembly
 Push the two floats into the channels in the container provided for this purpose until they au-
dibly engage.
 Align the air distributor.
 Place the foam filter and the filter basket in the container.
Installation
 Position the skimmer in the pond and submerge it in water until the pump chamber and con-
tainer are fully flooded.
 Ensure that the skimmer flap is correctly positioned. Ensure that the skimmer flap can move
freely.

Anchor the skimmer to limit its movement range.
 To do so, fasten a cord on the eyelet of the pump chamber. Anchor the other end of the
cord at the edge or bottom of the pond.
EN
SSM0006
SSM0007
13