Oase SwimSkim 25 Instrucciones De Uso página 15

Thoroughly cleaning the unit
Remove the skimmer from the water for thorough cleaning.
EN
 Disassemble the skimmer as shown in the image.
 Ensure that the air hose does not slide off the injector.
 Clean all parts with a brush under clear water.
Cleaning the pump, replacing the impeller unit:
 Open the pump cover (bayonet catch) and remove the impeller unit.
 Clean all parts with a brush under clear water.
 If the impeller unit is damaged or worn, replace it.
Assembling the skimmer
 Reassemble the skimmer in reverse order.
 Lay the power cable so that it is not pinched.
 Lay the air hose without kinks.
 When assembling the pump chamber container, ensure that the closing mechanism engages
audibly.
 Align the air distributor. (→ Assembly)
SSM0009
15