Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting on a pole
1. Using a screwdriver or similar tool, break the knockouts marked POLE(1) on the back-box.
2. Mount the back-box on the pole with the M4x30 screws. If installing two detectors vertically, the distance
between the upper detector and lower detector should be at least 20 mm (0.78 in). If mounting in a corner
location, ensure the distance from the side wall is at least 1m (3.2 ft).
3. Attach double-sided tapes to the pole mounting brackets for easier mounting.
4. Complete steps 3 to 10 from the Mounting on a wall section.
Publicidad
Tabla de contenido
