Installation Examples - Johnson Controls PG9350SL Manual Del Usuario

Installation examples

a. Double stacked protection. Since Receiver B may receive the infrared beam from Transmitter A, select the
frequencies as shown in the figure above. In the figure, the number in the square indicates the channel.
b. Long distance protection. Since Receiver C may receive the infrared beam from Transmitter A, select their
frequencies as shown in the figure below.
c. Double-stacked long-distance protection. More than double-stacked application is not possible. Always switch
the frequencies two channels apart when stacking devices on top of one another. For example, set the upper
device to channel 1 and the lower device to channel 3, or channels 2 and 4 respectively.