Disassembling The Device - Johnson Controls PG9350SL Manual Del Usuario

Disassembling the device

Disassemble the device before enrolling and mounting.
1. Loosen the cover lock screw with a screwdriver.
2. Place a coin in the recess and twist slightly to remove the cover.
3. Pull the cover from the back of the device.
4. To remove the main unit from the chassis, turn the optical unit 90° and remove the screws from both sides.
5. Pull the upper part of the main unit forward and up to remove it.
Caution: Do not place the main unit where it is exposed to direct sunlight. Doing so may cause damage to the
product.
6. Loosen the 5 screws from the back cover and remove the chassis from the back-box.
Note: Complete the Disassembly process for both the transmitter and receiver before mounting the device.