Using The Remote Control; Switching The Device On/Off With The Touch Control - Blumfeldt Heatbell Smart Wall Manual

USING THE REMOTE CONTROL

• Insert the power plug into the power
outlet.
• Set the power switch of the unit to the
"ON" position.
• To use the heater, press the ON/OFF
button on the remote control. Press the
MAX, MED or MIN buttons to adjust the
heater power.
• To turn the unit off, press the ON/OFF
button on the remote control again. If the
unit will not be used for a long period of
time, set the power switch to the "OFF"
position and unplug the power cord from
the wall outlet.
SWITCHING THE DEVICE ON/OFF WITH THE
TOUCH CONTROL
• Insert the power plug into the power
outlet.
• Set the power switch of the device to the
"ON" position.
• Press the POWER SETTING button to
adjust the heating power.
• If the unit will not be used for a long period
of time, set the power switch to the "OFF"
position and disconnect the power plug
from the power outlet.
EN
17