Air Filter Maintenance - Honeywell HW1000i Manual Del Propietário

Air Filter Maintenance

Air Filter Maintenance
B
A
C
FIGURE 34: Air Filter Removal (HW2000i Model)
Wash the air filter in a solution of household soap and
3.
warm water.
FIGURE 35: Wash Air Filter
4. Rinse parts thoroughly with water.
5. Using a clean, absorbent cloth, squeeze the air
cleaner element dry, being careful not to twist or tear
the filter.
FIGURE 36: Dry Air Filter
Coat the air filter in clean engine oil.
6.
FIGURE 37: Air Filter Oiling
24 www.honeywellgenerators.com
All manuals and user guides at all-guides.com
Squeeze out excess oil.
7.
FIGURE 38: Excess Oil Removal
8. Reinstall the air filter and air filter cover.
NOTE:
For the HW1000i model, carefully place filter between air
filter support pegs without tearing filter. See illustration
below.
FIGURE 39: Air Filter Installation (HW1000i Model)
9. Place the choke in the center position to allow it to
clear the back maintenance cover opening and rein-
stall the back maintenance cover.
CAUTION
Frequent or prolonged contact with engine oil may cause
skin cancer.
• Thoroughly wash hands and any areas of skin exposed
to used oil with soap and water.
NOTE:
The engine will smoke during initial start-up if too much oil
is left in the filter.
HW1000i / HW2000i Inverter Generator Owner's Manual