Care And Maintenance; Main Unit; Filters - Sharp FU-21SE Manual De Uso

CARE AND MAINTENANCE

(To maintain the best performance of this product, please clean the unit periodically.)
When cleaning, be sure to remove the power plug from the wall outlet. In addition, never
handle the power plug with wet hands.
Electrical shock and/or bodily injury may occur as a result.

MAIN UNIT

For soiling on the main unit and the installed
surface, clean as early as possible. Stubborn
dirt may be hard to remove.
Dry wipe with a soft cloth
For stubborn dirt, wipe with a soft cloth damp-
ened with water or warm water of 40°C or less.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc.,
may damage the unit surface.
Do not use detergents
Detergent ingredients may damage the unit
surface.
Do not get wet
Never apply water on the unit.
DIRT SENSOR
The sensitivity of the sensors will be come
unstable if the dirt sensor is dirty or blocked.
Remove dust on the surfaces of the sensor
openings using a vacuum cleaner.
Dirt sensor

FILTERS

Clean using the nozzle of a vacuum
cleaner
deodorization filter.
NOTE
• Do not push the vacuum cleaner too
forceful on the filter. Washing with
water is absolutely prohibited. It can
cause damage to the filter.
• Doesn't need to take care of HEPA
filter.
E-10
without removing
Deodorization filter
the