Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl RM 448 TC Manual De Instrucciones

English
Cutting width:
– RM 448.1 TC: 46 cm
– RM 448.1 PC: 46 cm
19.2 Blade
– Minimum thickness a: 2.0 mm
– Minimum width b: 39 mm
– Sharpening angle c: 30°
19.3 Sound Values and Vibration
Values
RM 448.1 TC
The K value for the sound pressure levels is
2 dB(A). The K value for the sound power levels
is 1.0 dB(A). The K value for the vibration values
is 1.90 m/s².
– Sound pressure level L
ance with EN ISO 5395-2: 82 dB(A)
– Guaranteed sound power level L
ured in accordance with 2000/14/
EC / S.I. 2001/1701: 95 dB(A)
– Vibration value a
hv
with EN 12096, EN 20643, EN ISO 5395-2,
handlebar: 3.80 m/s²
RM 448.1 PC
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
1.1 dB(A). The K value for the vibration value is
2.20 m/s².
– Sound pressure level L
ance with EN ISO 5395-2: 83 dB(A)
– Guaranteed sound power level L
ured in accordance with 2000/14/
EC / S.I. 2001/1701: 96 dB(A)
– Vibration value a
hv
with EN 12096, EN 20643, EN ISO 5395-2,
handlebar: 4.40 m/s²
For information on compliance with Employers'
Vibration Directive 2002/44/EC and
S.I. 2005/1093, see www.stihl.com/vib.
19.4 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
36
measured in accord‐
pA
meas‐
WAd
measured in accordance
measured in accord‐
pA
meas‐
WAd
measured in accordance

20 Spare Parts and Accessories

20 Spare Parts and Accesso‐
ries
20.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
20.2 Essential Spare Parts
– Blade: 6358 702 0100
– Blade fastening screw: 9008 319 9028
– Washer: 0000 702 6600

21 Disposal

21.1 Disposing of the Lawn Mower
Information on disposal is available from your
local authority or from a STIHL dealer.
Improper disposal may be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose of the product with domestic
waste.
22 EC Declaration of Con‐
formity
22.1 STIHL RM 448.1 TC,
RM 448.1 PC Lawn Mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: lawn mower
– manufacturer's brand: STIHL
– type: RM 448.1 TC, RM 448.1 PC
– cutting width: 46 cm
– serial number: 6358
0478-111-9952-B