GYS Energy Station FP Manual De Uso página 13

Operating manual
Risk of explosion and fire!
A charging battery can emit explosive gases.
• During charging, the battery should be placed in a well-
ventilated location.
• Avoid flames and sparks. Do not smoke.
• Protect the batteries' electrical contact surfaces against short
circuits.
• Do not leave a charging battery unattended for long periods
of time.
Risk of acid spatter!
• Wear protective goggles and gloves.
• If contact occurs with the eyes or skin, rinse immediately with
water and seek medical advice.
Login / Logout:
• Disconnect the power supply before connecting or
disconnecting the battery.
• The battery terminal that is not connected to the chassis must
be connected first. The other connection should be made on
the chassis away from the battery and fuel line.
• After the start-up operation, disconnect the booster. First
remove the chassis connection and then the battery connection,
in the order shown.
Connection:
• This appliance must be connected to an earthed socket outlet.
• Connecting to the mains supply must be done in accordance
with national installation regulations.
Maintenance:
• If the power supply cable is damaged, it must only be replaced
by a cable specified or supplied by the manufacturer or its
after-sales service.
• Maintenance work should only be carried out by qualified
persons.
• Warning! Always remove the plug from the mains socket
before carrying out any work on this equipment.
• Regularly remove the machine's protective cover and dust
with compressed-air. Take this opportunity to have a qualified
person check the electrical connections with an insulated tool.
• Never use solvents or other aggressive cleaning products.
• Clean the machine's surfaces with a dry cloth.
Translation of the original
instructions
ENERGY STATION FP
13