Selecting Tracks Directly; Folder Playback (Sd Cards And Usb Flash Drives Only) - Tascam CD-400U DAB Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Selecting tracks directly

The number buttons on the main unit and the remote control can
be used to directly enter track numbers.
1.
Use the number buttons on the main unit or the remote con-
trol to enter track numbers.
Enter the track number digits in order, starting with the larg-
est.
Audio CD track number entry
Set with two digits.
Example: for track 9, input 0w9
Data CD/USB/SD track number entry
Set with three digits.
Example 1: for track 105, input 1w0w5
Example 2: for track 4, input 0w0w4
2.
Press the main unit PLAY button or remote control 7 but-
ton.
The selected track will start to play.
Playback can also be started by pressing the main unit
MULTI JOG dial or remote control ENTER button.
3.
Press the main unit STOP button or remote control 8 but-
ton to end track number input and return to the regular dis-
play.
NOTE
i If you input the wrong number, you can press the CLEAR but-
ton to delete the input value.
i The largest number that can be shown for the currently play-
ing track is 999. If the track number exceeds 1000, --- will be
shown.
i In random mode, the number buttons cannot be used to set
tracks.
4 – CD/SD/USB playback
Folder playback (SD cards and USB flash
drives only)
When the current source is USB or SD and the play area is folder (
icon shown), the selected folder (the current folder) can be set
as the play area.-
In the procedure explained below, you can select a track and set
the folder that contains that track as the current folder.
1.
Select USB or SD as the current source. (see "Selecting the
playback source" on page 22)
2.
Set the play area to folder ( icon shown). (see "Setting the
playback area" on page 24)
USB
001
3.
Turn the main unit MULTI JOG dial or use the remote control
.// [l/;] buttons to select a track/folder.
The top line of the Home Screen shows the file or folder
name, and the icon starts to blink.
USB 02.File2.mp3
001
USB  Folder01
001
USB  Folder02
001
USB  Folder03
001
USB 01.File1.mp3
001
NOTE
i To cancel track/folder selection, press the CLEAR button on
the main unit or remote control.
i If you select a folder that does not contain any audio files,
NO FILE will be shown. At this time, if you turn the main unit
MULTI JOG dial or press the .// [l/;] buttons, the
name of the currently selected file will be shown and move-
ment might become impossible. If this happens, press the
CLEAR button on the main unit or remote control to cancel
selection. Then, try again.
i The current folder will change along with movement between
folders.
TASCAM CD-400U DAB
MP3
25

Publicidad

Tabla de contenido
loading

Tabla de contenido