Wireless Remote Control (Tascam Rc-Cd400) - Tascam CD-400U DAB Manual Del Usuario

2 – Names and Functions of Parts

Wireless remote control (TASCAM RC-CD400)

EJECT button
1
This has the same function as the EJECT button on the main
unit. (see "Inserting and removing discs" on page 21)
button
2 7
This has the same function as the PLAY button on the main
unit.
button
3 8
This has the same function as the STOP button on the main
unit.
MENU button
4
This has the same function as the HOME/MENU button on the
main unit.
/ buttons
5 m ,
i Press and hold these buttons to search backward/forward.
(see "Searching backward and forward" on page 27)
i When the current source is DAB or FM, press to automatically
search received frequencies for that frequency mode. (see
"Changing the received frequency" on page 34)
/ buttons
6 k j
i When the current source is USB or SD and the play area is
folder ( icon shown), press the k button to move up one
folder level. (see "Playback area" on page 24)
i When the current source is DAB or FM, press the k/j but-
ton to select a preset station.
i When a Menu setting screen is open, press the k button to
move up one menu level.
i The j button has the same function as the remote control
ENTER button.
i When the input source is DAB/FM, use to change preset num-
bers.
Number (0–9) buttons
7
i When the current source is CD, USB or SD and the play area is
set to "ALL", use the number buttons to select tracks by their
track numbers. For track numbers, a maximum of two digits
can be input for audio CDs and three digits for data CDs.
(see "Selecting tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
16
TASCAM CD-400U DAB
PRESET button
8
i When the current source is DAB or FM, press to program
preset stations manually. (see "Setting radio station presets
manually" on page 34)
i When the current source is DAB or FM, press and hold to pro-
gram preset stations automatically. (see "Setting radio sta-
tion presets automatically" on page 34)
DUB button
9
Press when stopped to start dubbing (copying) preparation.
(see "Dubbing procedures" on page 38)
FM MODE button
0
When the current source is FM, press to switch between stereo
and mono for FM broadcast reception. (see "Setting the FM
mode" on page 34)
SOURCE button
q
This has the same function as the SOURCE button on the main
unit. (see "Selecting the playback source" on page 22)
button
w 9
This has the same function as the PAUSE button on the main
unit.
DISPLAY/RDS/INFO [PAIRING] button
e
i Press during playback to show a variety of information. (see
"Time and text information display" on page 30)
i When the current source is BLUETOOTH, press and hold to
activate Bluetooth pairing mode. Press when pairing to end
pairing mode. (see "Pairing" on page 31)
i Press when the current source is FM to switch the RDS mode.
(see "RDS (European model only)" on page 36)
i When the input source is DAB, press to start automatic sta-
tion selection.
/ [ / ] buttons
r . / l ;
i When the current source is CD, USB or SD and the play area is
set to "ALL", press to skip tracks. (see "Skipping to earlier and
later tracks" on page 24)
i When the current source is USB or SD and the play area is
folder ( icon shown), press to move between tracks and
folders. (see "Playback area" on page 24)
i If the current source is DAB or FM, press to change the fre-
quency received. (see "Tuning in radio stations" on page
34)
i When a Menu screen is open, turn to select items and change
setting values. (see "Basic Menu screen operations" on page
18)
ENTER button
t
When a Menu screen is open, press to confirm selections and
settings.