GYS GYSFLASH S 1.12 PL Manual De Uso página 9

Operating manual
Do not leave a charging battery unattended for a long time.
Connection / disconnection :
• Ensure that the charger's power supply is disconnected
before connecting or disconnecting to the battery terminals.
• Always ensure the Red clamp is connected to the «+» battery
terminal first. If it is necessary to connect the black clamp
to the vehicle chassis, make sure it is a safe distance from
the battery and the fuel/exhaust pipe. The charger must be
connected to the mains.
• After charging, disconnect the charger from the mains, then
disconnect the negative clamp from the car body and then
disconnect the positive clamp from the battery, in this order.
Connection :
• Class II device
• The connection to the power supply must be carried out in
compliance with national standards.
Maintenance :
• If the power cable is damaged, it must be replaced by
the manufacturer, its after sales or by an equally qualified
person to prevent any accidents.
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall socket
before carrying out any work on the device.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see home
page).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on
our website (see cover page).
Waste management :
• This product should be disposed of at an appropriate
recycling facility. Do not throw away in a household bin.
Translation of the original
instructions
GYSFLASH S 1.12 PL
9