Pari PEP S Sysem Instrucciones De Uso página 57

PROCEDURE:
• Add about 1 teaspoonful wash-
ing-up liquid to 3 l warm drink-
ing water.
• Place all the parts in the wash-
ing-up water.
Application time: 5 minutes
• Occasionally move the parts back and forth.
• In case of visible soiling, use a medium-soft brush (e.g. a
toothbrush) which is used exclusively for this purpose.
RINSING:
• Rinse all individual parts thoroughly under running drinking
water at approx. 15 °C for 3 minutes.
DRYING:
• Shake the water out of all of the parts.
• Place all parts on a dry, clean and absorbent surface, and
allow them to dry completely.
If the pressure gauge connector line is visibly soiled, replace it.
In the dishwasher
The individual parts can be cleaned in a standard household
dishwasher provided it is connected to a mains water supply of
drinking water quality.
To ensure safety when handling the cleaning agent used, fol-
low the corresponding instructions for use, particularly the ac-
companying safety instructions.
PROCEDURE:
Do not clean the individual components together with very
dirty dishes.
• Place all components in the crockery basket so that no wa-
ter can collect in them.
• Select a program with at least 50 °C.
– 21 –