Using The Window Cover - goodbay 59513 Instrucciones De Uso

the guide groove in the right part of the window insert�
5� Set the desired width�
6� Screw the fixing nut onto the fixing screw.
The window insert is now assembled and looks something like this:
Installing the window insert
The window insert (18) can be used with both vertically and hori-
zontally closing windows�
1� Open the window�
2� Insert the window insert into the window frame�
3� Adjust the width of the window insert a second time if neces-
sary�
CAUTION!
Fingers and limbs can be crushed.
• Do not hold fingers or limbs between the window, frame or
window insert�
4� Slide the window closed so that the window insert is wedged
between the window and the frame�
The window insert is now installed. There should be as little
free space as possible on the sides of the window insert.
5� Clamp the end of the exhaust air hose with the window insert
adapter (17) into the window insert�
The exhaust air from the air conditioner is now discharged to
the outside and the warm air is kept outside.
7.4

Using the window cover

The window cover (13) is intended for use with casement windows� It seals open spaces and keeps
warm air and rain outside� The window cover can be used universally for casement windows with a cir-
cumference of up to 400 cm�
The velcro tape (14) is needed to install the window cover�
Installing the window cover
1� Open the window�
2� Lay the velcro tape along the window frame and along
the opened window�
The velcro tape is self-adhesive and can be cut to size
as required.
3� Attach the window cover to the window frame and to the
open window using the velcro tape�
The straight side of the window cover (A) is attached to
the window frame.
The curved side of the window cover (B) is attached to
the open window.
4� Move the zip to the place where the exhaust hose is to
be positioned�
The window cover is now installed.
Risk of crushing!
EN
30