Commissioning; Function Buttons And Status Indicators - goodbay 59513 Instrucciones De Uso

User Manual
Passing the exhaust hose through the window cover
EN
8

Commissioning

NOTICE!
There is refrigerant in the air conditioner. When the air conditioner is moved, the refrigerant is disper-
sed. If the air conditioner is switched on in this condition, it may cause damage or loss of cooling capa-
city.
• Allow the air conditioner to stand for at least 12 hours before operating it to allow the refrigerant to
collect in the compressor�
• Do not move the air conditioner during operation�
1� Plug the mains cable (6) into a free and easily accessible socket�
Make sure that the cable is laid in such a way that it does not obstruct anyone and is not dama-
ged.
A signal tone sounds.
2� Open the cover of the air outlet (1)�
3� Make sure that the air inlets and outlets are clear�
4� Make sure that no objects (e.g. curtains) can be sucked in by the air inlets or obstruct the air flow.
5� Make sure that the air filter (7) is correctly inserted and free of impurities.
The air conditioner can now be switched on and used.
9

Function buttons and status indicators

The function buttons and status indicators are located on the control panel (4) of the air conditioner�
The following illustration and table explain the function buttons and status indicators�
Letter
a
b
c
Status indicator for
d
31
1� Guide the exhaust hose (16) through the opening in the window cover�
2� Secure the exhaust hose by closing the two zips�
You can additionally use cable ties to reinforce the fastening (not inclu-
ded in the scope of delivery).
The exhaust air from the air conditioner is now discharged to the outside
and the warm air is kept outside.
Material damage!
Designation Description
Status indicator The status indicator lights up green when the SLEEP mode is ac-
SLEEP tive
Status indicator The status indicator flashes yellow while a timer is being set.
TIMER The status indicator lights up yellow when a timer is active�
The status display shows the temperature, timer duration and er-
Status display
ror codes�
The status indicator lights up yellow when the strong fan is active�
strong fan