English - EGAmaster 66265 Manual De Instrucciones

Please read the product instruction carefully and use the product correctly under the instruction.
1.INC button:Short press for incremental measurement conversion.
2.mm/in button:Short press for inch/metric conversion.
3. /0 button:short press to turn on or turn off, long press to set zero.
4.Battery cover: replace battery
5.Thumb roller
6.Scale
7.Beam
8.Depth measurement rod: measuring depth
9.Locking screw:unclockwise for fixing the slider in any place,unclockwise for unlock.
10.LCD screen: display measurement value
11.DATA button: bluetooth function button, use the function for the bluetooth product, see the
bluetooth operation and made a detailed istrunction.
12.Internal jaws: measuring Internal dimension
13.Step measurement: measuring step dimension
14.External jaw: measuring external dimension
Before use, please make sure that the battery is installed.
1. Rotate to unclockwise release the lock of the caliper, and hand-pushed roller caliper can be
moved.
2. Turn on to check if the caliper work well.
3. Clean the measuring surface of the measuring tool. Close the measuring claw with
appropriate force, short-press to turn on and set zero, and the caliper can be used normally,
size of different parts can be measured by following operation.
1. PRODUCT FIGURE AND BUTTONS
2. USE STEPS

ENGLISH

7