Commercial Guarantee - Cooke & Lewis CLCGLEDS60 Manual Del Usuario

Ocultar thumbs Ver también para CLCGLEDS60:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
Trouble shooting
Problem
Excessive vibration.
The light is on, but the
fan does not work.
Both the light and
motor do not work.
Suction
performance reduced.
LED perimeter light
does not work
This appliance respects laws of the suppression of radio interference. As the Manufacturer has
a policy of continuous product improvement, it reserves the right to adapt and carry out any

Commercial guarantee

At Cooke and Lewis we take special care to select high quality materials and use manufacturing
techniques that allow us to create ranges of products incorporating design and durability. That's why
we offer a 24 months' guarantee against manufacturing defects on our curved glass hood.
This curved glass hood is guaranteed for 24 months from the date of purchase, if bought in store,
or delivery, if bought online, for normal (non-professional or commercial) household use. You may
Please keep your proof of purchase in a safe place.
The guarantee covers all parts and labour costs associated with the repair of the curved glass hood
if it is found to be defective due to faulty materials or workmanship within 24 months from the date of
purchase or delivery subject to the exclusions set out below and provided it was used for the purpose
for which it is intended and subject to installation, cleaning, care and maintenance in accordance with
the information contained in the user manual. This guarantee does not cover defects and damage
caused by normal wear and tear of curved glass hood and damage that could be the result of
GLOA10327_SM - 100000032-100000033 Chimney v5_r.indd 6
Possible cause
The appliance is not installed
properly on the brackets.
The fan blade is damaged.
The fan blade is jammed.
The motor is damaged.
Light bulb blown.
Power connection loose.
Speed may be too low.
are dirty.
Top vent might be
obstructed.
Optional vent kit might be twisted.
The installation may not comply with
the manufacturers instructions.
LED perimeter strip light connection
is loose.
Solution
Take down the appliance and check
Switch off the appliance. Repair to
personnel only.
Replace with a bulb of the
correct rating.
Check power supply.
Select a higher speed.
Care and maintenance section).
Clear any obstruction.
Ensure that the vent kit
manufacturer's instructions.
The vent hose should be correct
diameter throughout with no
reductions or restriction.(See
installation section).
Turn off the appliance, refer to the
installation manual for access to
the male and female connection to
ensure it is secure.
10/05/2017 18:35

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Clcgledb6036636028426373663602842644

Tabla de contenido