Grundfos CIM 500 Instrucciones De Instalación Y Funcionamiento página 44

A.1.14. Update
You can update the firmware by means of the built-in webserver. The binary file is supplied by Grundfos.
To make installation and configuration easier, you can upload the configuration to a PC for backup or distribution
to multiple modules.
If you experience problems with logging in to the webserver after a firmware update, perform a
factory reset.
Update
Object Description
Firmware Path to binary firmware image that can be used for updating the module.
Update Click [Update] to start the update. The procedure takes approximately one minute.
File Path to the configuration file.
Download to
Click here to transfer the configuration file to the module.
module
Upload from device Click here to upload the configuration of the module to a file on your PC.
Restart module By pressing this button, the CIM 500 module does a power-up reset.
296