Weighing Unit; Gram (G); Kilogram (Kg); Pound (Lb) - OHAUS TD52XW Manual De Instrucciones

EN-28

3.7 Weighing Unit

Enter this menu to activate the desired units. Default settings are bold.
NOTE: Due to national laws, the indicator may not include some of the units of measure listed. If the
Security Switch is set to ON, the Units are locked at their current setting.

3.7.1 Gram (g)

Set the status.
Off = Disabled
On = Enabled

3.7.2 Kilogram (kg)

Set the status.
Off = Disabled
On = Enabled

3.7.3 Pound (lb)

Set the status.
Off = Disabled
On = Enabled

3.7.4 Ounce (oz)

Set the status.
Off = Disabled
On = Enabled

3.7.5 Pound: Ounce (lb: oz)

Set the status.
Off = Disabled
On = Enabled

3.7.6 Tonne (Metric Tonne)

Set the status.
Off = Disabled
On = Enabled

3.7.7 Ton (Short Ton)

Set the status.
Off = Disabled
On = Enabled

3.7.8 Custom Unit (c)

Use the Custom Unit to display weight in an alternative unit of measure. The custom unit is defined
using a conversion factor, where the conversion factor is the number of custom units per gram
expressed in scientific notation (Factor x 10^Exponent).
Factor
Set the conversion factor using the numeric keypad.
Settings of 0.1000000 to 1.9999999 are available. The default setting is 1.0.
Exponent
Set the factor multiplier.
-3 = divide the Factor by 1000 (1x10
Find Quality Products Online at:
-3
)
GlobalTestSupply
www.
Defender 5000 Indicators
.com
sales@GlobalTestSupply.com