Counting; Set The Average Piece Weight (Apw) - OHAUS TD52XW Manual De Instrucciones

EN-38

4.2 Counting

Use this application to count samples of uniform weight.
Press the
corresponding to Counting is displayed in the
screen.
The default (or last) Average Piece Weight (APW) is
displayed.
Set the APW value according to section 4.2.1 and
then place objects on the pan to display the number
of pieces.

4.2.1 Set the Average Piece Weight (APW)

Note: It is recommended that the APW is larger than 1d. If APW is between 0.05d and 1d, a warning
message will be displayed and the information line will show 'APW is too small!'. If APW is less than
0.05d, an error message will appear and the APW value cannot be stored.
There are two methods to set the APW:
1. Entering a Known APW
Method 1
Key in the Piece Weight using the alphanumerical
keypad.
Then press the Softkey corresponding to the icon
Method 2
Alternatively, first press the Softkey corresponding
to the icon
setting the APW.
Press the Softkey corresponding to the icon
edit the APW value using the alphanumerical
keypad.
After editing, press the Softkey corresponding to
the icon
Softkey corresponding to the icon
sub-menu.
Find Quality Products Online at:
button until
.
to enter the sub-menu for
for confirmation, and then press the
GlobalTestSupply
www.
the icon
to
to exit the
Defender 5000 Indicators
.com
sales@GlobalTestSupply.com