Servicing; Maintenance - Mennekes AMTRON Professional+ 7,4 Manual De Instrucciones Y De Instalación

8

Servicing

8.1

Maintenance

DANGER
Risk of electric shock due to damaged product
If a damaged product is used people can be seri-
ously injured or killed due to an electric shock.
u Do not use a damaged product.
u Mark a damaged product to ensure that no one
uses it.
u Arrange for a qualified electrician to rectify the
damage without delay.
u Have the product taken out of service by a
qualified electrician if necessary.
u Check the product for operational readiness
and external damage daily or on each charging
process.
Examples of damage:
n Defective housing
n Defective or missing components
n Illegible or missing safety labels
A maintenance contract with a responsible
service partner guarantees regular mainten-
ance.
Maintenance intervals
The tasks described below may only be car-
ried out by a qualified electrician.
Select the maintenance intervals with due consider-
ation of the following aspects:
n Age and condition of the product
n Environmental influences
n Mechanical stress
n Last test reports
Perform maintenance at least in the following inter-
vals.
42
Every 6 months:
Compon- Maintenance work
ent
Housing u Visually inspect for defects and
exterior damage.
u Check product for cleanliness and
clean if necessary.
Housing u Check product for foreign objects
interior and remove if necessary.
u Visually inspect for dryness, re-
move any foreign objects from the
seal and allow the product to dry.
Carry out a function test if neces-
sary.
u Check the fastening on the wall or
on the MENNEKES stand system
(e.g. pole) and tighten the screws
if necessary.
Protective u Visually inspect for damage.
devices u For the product variants with re-
sidual current device: Check the
function of the residual current
device. Press the test button for
this purpose.
LED in- u Check LED info panel for function
formation and readability.
panel
Charging u Check closure (e.g. hinged lid) for
connection ease of movement and complete
closing.
u Check the charging socket con-
tacts for contamination and for-
eign objects. Clean if necessary
and remove foreign objects.
Charging u Check the charging cable for
cable damage (e.g. kinks, cracks).
u Check the charging cable for
cleanliness and foreign objects,
clean and remove foreign objects
if necessary.