Charging Connections - Mennekes AMTRON Professional+ 7,4 Manual De Instrucciones Y De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 101
Symbol
Meaning
pulsates Charging process paused. All require-
ments for charging a vehicle are met.
The charging process is paused due to
a vehicle feedback or was terminated
by the vehicle.
Colour of the symbol (dependent on the configura-
tion)
Wait time
Symbol
Meaning
lights up n The charging process was ended on
the product. Wait for confirmation
from the vehicle.
n Waiting for authorisation.
flashes
The charging process has finished. Re-
move the charging cable.
Colour of the symbol: white
Fault
Symbol
Meaning
lights up
There is a fault that is preventing the
or
vehicle from charging.
flashes
1 "9 Troubleshooting" [
Colour of the symbol: red
3.9

Charging connections

The product variants are available with the follow-
ing charging connections:
12
Permanently connected charging cable with type
2 charging connector
This can be used to charge all vehicles with a type
2 charging plug. A separate charging cable is not
necessary.
Type 2 charging socket with hinged lid for use
with separate charging cable
This can be used to charge all vehicles with a type
2 or type 1 charging plug (depending on the char-
ging cable used).
Type 2 charging socket with shutter for use with
separate charging cable
Only available for the product variants Profes-
sional(+) E 7.4 / 22.
 45]
}
The shutter provides additional protection against
electric shock and is legally prescribed in some
countries.
1 "2.2 Intended use" [} 4]
This can be used to charge all vehicles with a type
2 or type 1 charging plug (depending on the char-
ging cable used).

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido