Creating A Priority Circuit; Connecting The Float; Disposal - Dometic TEC 60 Instrucciones De Montaje

TEC60
10.3

Creating a priority circuit

You can create a priority circuit using a changeover relay whereby the exter-
nal voltage supply has priority over the generator, see circuit diagram
(fig. h, page 9):
Item Description
1 User load
2 AG169 changeover relay
3 Inverter
4 Mains
➤ Mount the changeover relay in a suitable position.
➤ Connect the wires following the circuit diagram (fig. h, page 9).
10.4 Connecting the control panel
➤ Connect the control panel to the connection box of the inverter using the
extension cable provided on the plug for the control panel (fig. h 7,
page 9).
10.5

Connecting the float

➤ Connect the float from the tank to the float connection (fig. i 1, page 9).
11

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
All manuals and user guides at all-guides.com
Disposal
37