Installation
For internal installation, you need to prepare a sealed compartment against
the vehicle interior which can also be insulated against sound.
– Attach exhaust openings to the floor.
➤ Mount the gaskets to the casing and affix them with the srews (fig. 3,
page 3).
➤ Position the casing in the desired area and attach it with the appropriate
screws. (fig. 4, page 3).
➤ Insert the generator into the casing and screw it into place (fig. 5,
page 3).
➤ Mount the casing flap and attach it with the pins (fig. 6, page 3).
9.3
Securing the silencer
Observe the following instructions when installing the exhaust pipe:
Do not create any sharp bends which will inhibit the flow of exhaust
fumes.
Align the manifold (fig. 7 1, page 4) along the housing to ensure greater
damping of vibration.
Use the exhaust pipe extension to divert the exhaust fumes (fig. 7 2,
page 4).
Secure the extension to the vehicle floor (fig. 7 3, page 4).
➤ Secure the silencer (fig. 7 4, page 4) as in one of the alternatives shown
in fig. 8, page 4 to fig. b, page 5.
32
All manuals and user guides at all-guides.com
TEC60
EN