Using Dolby Noise Reduction; Multi-Cd Player; Playing A Cd - Pioneer SUPER TUNER III KEH-P7025 Operación Manual

Section
Cassette Player
04
Note
• The radio intercept function does not work
during a Music Search operation.

Using Dolby noise reduction

When you listen to tapes that have been
recorded with Dolby B NR, turn Dolby B NR on.
1 Press
FUNCTION
Press
FUNCTION
the display.
2 Press 5 to turn Dolby B NR on.
appears in the display. The tape
Dolby B NR :ON
will play with Dolby B NR on.
3 Press ∞ to turn Dolby B NR off.
Dolby B NR :OFF
tape will play without Dolby B NR.
Notes
• Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D sym-
bol are trademarks of Dolby Laboratories.
• The
DOLBY B NR
B NR is turned on.
16
En
All manuals and user guides at all-guides.com
to select .
B NR
until appears in
Dolby B NR
appears in the display. The
indicator lights when Dolby

Multi-CD Player

Playing a CD

You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 17.
1
indicator
DISC NUMBER
Shows the disc currently playing.
2
indicator
TRACK NUMBER
Shows the track currently playing.
3
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press to select the multi-CD
SOURCE
player.
Press until you see
SOURCE
2 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
to buttons.
1 6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as for disc 7, until the disc number
1
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
1 2
3
displayed.
Multi-CD