Fine Adjusting Equalizer Curve; Adjusting Bass; Adjusting Treble - Pioneer SUPER TUNER III KEH-P7025 Operación Manual

Section
Audio Adjustments
06

Fine adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
Level (dB)
Center frequency
1 Press
AUDIO
the Q factor (e.g.,
display.
2 Press AUDIO to select the desired band for
adjustment.
(low)—
LOW MID
3 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— —
LOW : 40 80 100
— —
MID : 200 500
HIGH : 3.15 k—8 k
4 Press 5/∞ to select the desired Q factor.
Press 5 or ∞ until the desired Q factor appears
in the display.
— — —
2 N 1 N 1 W
Note
• If you make adjustments when a curve other
than
CUSTOM2
is updated.
26
En
All manuals and user guides at all-guides.com
EQ Low/EQ Mid/EQ High
Q=2W
Q=2N
Frequency (Hz)
and hold unitil frequency and
) appears in the
F 80 Q 1W
(mid)— (high)
HIGH
— (Hz)
160
— (Hz)
1 k 2 k
— — (Hz)
10 k 12.5 k
2 W
is selected,
CUSTOM1

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
).
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press
AUDIO
Press
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
40 63 100
3 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level.
increased or decreased.

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In and
FRT1
affects only the front output: rear output cannot
be adjusted.
1 Press
AUDIO
Press
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— —
2.5k 4k 6.3k
curve
3 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level.
increased or decreased.
to select .
Bass
until appears in the display.
Bass
(Hz)
160
– is displayed as the level is
+6 –6
modes, treble adjustment
FRT2
to select .
Treble
until appears in the display.
Treble
— (Hz)
10k
– is displayed as the level is
+6 –6