1
INSERT THE BOLTS INTO THE AWNING TRACK.
With the awning
on a stable surface,
insert 2 bolts on
each side into each
of the tracks. Slide
the bolts toward the
center as shown.
2
ATTACH THE BRACKETS: CHOOSE LOW POSITION OR HIGH POSITION.
Place the brackets over the bolts
you inserted in the previous step.
Using a 13 mm wrench, install 2
thin washers and 2 nuts as shown.
Be sure to orient the bracket as
pictured relative to the zipper. Do
not tighten completely yet. NOTE:
The zipper will face the ground.
cremallera
Instruction #1036150A - page 2 of 11
LOCKNLOAD PLATFORM LOW AND HIGH POSITION
LOW POSITION
POSITION BASSE
POSICIÓN BAJA
zipper
glissière
HIGH POSITION
POSITION HAUTE
POSICIÓN ALTA
zipper
glissière
cremallera