Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
C
Fig. 5 & 5a
Fig. 6
4
58
G
IMPORTANT
The flexible exhaust hose 6 should be less than 1m during operation,
which provides the best performance. This length has been designed
especially according to the specifications of the air conditioner. Do not
use an extension or exchange for a different hose as that may lead to
malfunctioning. The exhaust air must flow freely, any blockage can lead
to overheating of the air conditioner. Take care to prevent any bow or
bend in the exhaust hose.
OPERATION
8
7
1
2
1. Timing button
2. Mode button
3. Down button
4. Up button
5. Speed button
6. Switch button
7. Swing (Air Flow)
8. Sleep control function
Before starting operations in this section:
1)
Find a place where there is power supply nearby.
2)
As shown in Fig.5 and Fig.5a, install the exhaust hose, and adjust the
window position well.
3)
As shown in Fig. 6, connect drain hose well (only for using heating model) ;
4)
Insert the power cord into an grounded AC220~240V/50Hz socket;
5)
Press the POWER button to turn on the air-conditioner.
1.
Before using
Notice:
-
Operation temperature range:
Maximum cooling Minimum cooling
DB/WB(ºC) 35/24 18/12
Maximum heating Minimum heating
DB/WB(ºC) 27/--- 7/---
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
-
When using functions on cooling and dehumidifying, keep an
interval of at least 3 minutes between each ON/OFF.
-
+
4
5
6
Publicidad
Tabla de contenido
