Doro 635ipw Manual Del Usuario página 2

Connection/registration
Handset must be registered to the base unit before use.
1. Connect the enclosed mains adaptor to the
charger and to an electrical wall socket.
2. Insert the batteries into the handset ensuring
correct battery polarity is observed.
3. Place the handset in the charger with the keypad
buttons facing outwards, once the handset is
correctly positioned a tone will be heard. Charge
for 24 hours without interruption.
When the handset is fully charged it must
be registered to the main base unit.
4. Press and hold the
BASE for approximately 10 seconds until the red
indicator light starts flashing. Registration mode
will remain active for 1 minute.
5. Press
W
6. Press
* * # * # #
7. Registration is displayed. Press
8. Register is displayed. Press
9. Enter the current base unit PIN code
(0000 at default). Press
10. If the registration is successful the handset
number will be shown on the right hand side of
the display.
11. Set desired language according to the main
manual (installed on computer).
Please note!
Use an original adapter only (6 VDC)!
.
English
button on the MAIN
J
.
.
W
.
W
.
W