Intended Use - BGS technic 8669 Manual De Instrucciones

for Fiat, Ford, Opel, Suzuki 1.3 Diesel
TOOLS
1 Crankshaft counter-holding wrench, to be used as OEM
Fiat 1871000200 / Ford 303-1469 / Opel (Vauxhall) KM-662-C
2 Crankshaft setting tool, to be used as OEM
Opel (Vauxhall) EN 46785 / KM 955 / Suzuki 09912-38300
3 Camshaft adjusting tool, to be used as OEM
Fiat 1871000900 / 1860985000 / Ford 303-1472 / Opel EN 46781 / Suzuki 09917-68610
4 Chain tensioner lever, to be used as OEM Fiat 1870900400
5 Crankshaft locking tool, to be used as OEM Fiat 1870900300 / Ford 303-1468
6 Crankshaft locking tool, Fiat 8 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This tool set is used for checking and setting the engine timing on following vehicles:
Fiat
Opel (Vauxhall)
Suzuki
Ford
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
Punto 1.3
Panda 1.3
Idea 1.3
Doblo 1.3
Doblo Cargo 1.3
Agila 1.3
Corsa-C 1.3
Combo-C 1.3
Corsa-D 1.3
Astra-H 1.3
Tigre-B 1.3
Meriva 1.3
Ingis 1.3
Wagon 1.3
Swift 1.3
KA 1.3
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
JTD 188A9.000
JTD 169A1.000 / 188A8.000
JTD 199A3.000 / 188A9.000
JTD 188A9.000
JTD 188A9.000
CDTi Z13DT
CDTi Z13DT
CDTi Z13DT
CDTi Z13DTH / Z13DTJ
CDTi Z13DTH
CDTi Z13DT
CDTi Z13DT / Z13DTJ
CDTi Z13DT
CDTi Z13DT
CDTi Z13DT
TDCi
BGS 8669
2003-2007
2003-2009
2004-2006
2004-2006
2004–2006
2003-2008
2003-2007
2003-2009
2006-2009
2004-2009
2004-2009
2004-2009
2003-2009
2003-2009
2003-2010
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed