ARIETE 1312 Manual De Instrucciones página 43

Warning!
This cleaning operation must be carried out when the appliance's hot parts have cooled down to room
temperature.
Warning!
Do not use abrasive detergents.
Clean the ed parts of the appliance using a non-abrasive damp cloth to prevent damaging the body.
Unlocking the coffee grinder
In the event the coffee grinder gets blocked, this might be due to impurities among coffee beans which have
caused the grinder to get blocked.
The mills of the grinder are completely removable. To remove the mills, proceed as follows.
Turn off the appliance.
Unplug it from the electric outlet.
Remove residual coffee powder from the lter holder (G).
Turn the bezel for adjusting the grinding level (P) to the left (
level (9, , ) (Fig.
for coffee powder.
Remove the lid from the coffee beans container.
Turn the grinder protection to the symbol (
Pull out the protection with the mills (Fig. 9-3 ).
Clean the grinder mills and the coffee grinder seat using the provided brush for the grinder mills cleaning (S).
Warning!
Do not wash the mills under running tap water or in the dishwasher.
Insert the mills together with the protection into its seat and lock it again turning it towards the symbol (
If the mills are not inserted properly in the coffee grinder seat, an error message will appear on the display.
Plug the appliance into the outlet (Fig. ).
Press the on/off button (
Restore the proper grinding level (see paragraph "Adjusting the grinding level").
Place a container under the coffee grinder.
From the beverage selection home page, select a coffee beverage.
Press the coffee bean button and start the grinding (for detailed information, see paragraphs "How to make
coffee beverages" and "How to distribute coffee for coffee and milk-based beverages").
Let ground coffee fall into the container.
Throw away the ground coffee to remove impurities.
The coffee grinder is unlocked and the appliance is ready to make new beverages.
D
If the coffee grinder fails to start again and remains blocked, press the On/Off button (
appliance.
Repeatedly turn the bezel for adjusting the grinding level (P) left and right (Fig.
Repeat the procedure as previously described to try to restore proper operation of the coffee grinder.
If the operation is not successful after several attempts, contact the closest Authorised Service Centre.
When setting the appliance out of service, unplug the power cord from the power outlet, empty and clean the
water tank as well as the drip tray (see paragraph "Maintenance of the appliance").
In case of scrapping you will be required to separate the various materials used in the construction of the
appliance and dispose of them according to their composition and to the applicable laws in the country of use.
). Impurities having caused the appliance to block will thus fall into the compartment
).
) to turn O the appliance (Fig. 3).
) in order to select the coarsest grinding
) to turn off the
).
).
.
43