ARIETE 1312 Manual De Instrucciones página 35

Once you have selected the type of beverage to brew from the main screen and adjusted the grinding amount,
the size and the froth amount settings, follow the steps below.
Choose the single wall lter for cup or cups (D) or the double wall lter for cup or cups (E) depending
on the amount of coffee you wish to make or according to the information provided for the selected type of
beverage.
Single wall lter for cup
Single wall lter for cups
Double wall lter for cup
Double wall lter for cups
Pod lter
Insert the lter into the lter holder (Fig.
3 Place the lter holder under the coffee grinder (Fig. 6). Insert the lter holder aps into the speci c support
under the coffee grinder.
Press the coffee bean button in the "Grinding amount" page to start grinding according to the previously
con gured settings.
If needed, manually adjust the grinding level as previously described.
The appliance automatically stops grinding when the default or the previously selected amount of ground
coffee is reached.
When selecting "Manual" for the grinding amount, press the coffee bean button again once you reach the
desired amount.
Remove the lter holder from the coffee grinder seat (L).
6 Press the ground coffee into the lter holder using the coffee presser (T) (Fig.
Remove any coffee residue from the lter holder.
Insert the lter holder into its seat (K) (Fig.
Warning!
Tighten the lter holder well and make sure it is properly screwed to the ange.
I
9 Place a suitable cup for the type of beverage selected on the cup-resting grill (Fig. 9).
The single wall lter is perfect if you are already familiar with
the preparation of espresso coffee.
When using this lter, the grinding level, the quantity and the
pressing level of the coffee must be properly balanced with
each other. Otherwise, coffee will ow too quickly (in case
of a too-coarse grinding and if coffee powder has not been
suf ciently pressed) or too slowly (if coffee grinding is too
ne and if coffee powder is too pressed) through the lter.
Single wall lter inserts are suitable only for freshly ground
coffee.
Thanks to the double wall lter inserts, water ows more
slowly through coffee grounds during the preparation pro-
cess.
The double wall lter allows you to pay less attention to the
correct pressing level and to the grinding level of the coffee.
For this reason, the double wall lter is ideal for the less e -
perienced. It makes it easier to prepare espresso coffee and
guarantees a perfect cream.
Use the pod lter only with coffee pods that bear the E.S.E.
compatibility mark.
).
).
-
).
.
35