Shutting Down The Appliance - Kärcher BR 55/60 W Ep Manual De Instrucciones

Note
Carry out the initial cleaning attempts with
less contact pressure. Increase contact
pressure step-by-step until the desired
cleaning result is achieved. A correct set-
ting of the contact pressure reduces power
consumption and the wear and tear of the
brushes.
The brush motors come to a halt when the
machine stops and when there is overload.
Warning
Floors can get damaged on account of too
high contact pressure. Carry out the initial
polishing attempts with less contact pres-
sure. Increase the contact pressure as per
requirements until the desired polishing re-
sult is achieved.
Setting the Vacuum Bar
Oblique position
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Loosen crossh-handles.
Turn the vacuum bar.
Tighten the cross-handles.
Inclination
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Release the wing nuts.
Tilt the vacuum bar.
Tighten the wing nuts.

Shutting Down the Appliance

Close the regulatory button for setting
the water quantity.
Release the safety switch.
Lift the cleaning head.
Briefly drive forward and suck of the re-
maining water.
Raise the vacuum bar.
Apply parking brake (optional). Press
the pedal downwards and move it to the
right to lock it.
Turn the program selection switch to
"OFF".
23
English