Parts List; Return To Cembre For Overhaul - Cembre RHU450 Manual De Uso

3.2) Replacement of the automatic coupler
To replace the automatic coupler proceed as follows:
– Remove the old coupler.
– Carefully clean the thread to remove the old sealant.
– Apply Tefl on tape to the thread.
– Fit the new automatic coupler and tighten to 30 Nm (22 lbf ft).
3.3) Storage
When not in use, the head should be stored and transported in the steel case, to prevent damage.
This steel case type VAL-450; Size 285x212x124 mm (11.2x8.3x4.9 in.) and weight 2,8 kg (6.16 lbs).

4. PARTS LIST

(Ref. to Fig. 3)
Code N° Item
6280015 01 FORK
6520603 02  SPRING
6560744 03 LOCKING PIN
6560570 04 DIE LOCATING PIN
6361850 05  SEAL
6120015 06 CYLINDER
6620430 07 RAM
6360454 08  O-RING
6170170 09 SPRING COVER
6700290 10 CIRCLIP
6760238 11 SPLIT PIN ø 4x15
6521160 12 SPRING
6340100 13 M6x10 GRUB SCREW
The items marked () are those Cembre recommend replacing if the head is disassembled.
The guarantee is void if parts used are not Cembre original spares.
When ordering spare parts always specify the following:
- code number of item
- name of item
- type of head
- Serial number of head

5. RETURN TO Cembre FOR OVERHAUL

IIn the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
5
DESCRIPTION Qty Code N° Item
1 6520880 14
1 6170080 15
1 6640190 16
1 6232015 17
1 6232077 18
1 6650118 19
6360195 20  O-RING
1
1 6240080 21
6040410 22  BACK-UP RING
1
1 6340540 23
2 6060120 24
6800186 25
1
6525072 26
1
DESCRIPTION
RAM SPRING GUIDE
CHAIN
ø 6 GROWER WASHER
LABEL (TG. 0354)
METAL LABEL (TG. 0277)
ø 2,5x3,5 RIVET
M6x12 SCREW
M10x8 GRUB SCREW
Q14-MS COUPLER
PROTECTION CAP
NIPPLE 3/8"-1/4"
ENGLISH
Qty
1
1
2
1
1
2
1
2
1
1
1
1
1