Operating And Programming - Yeedi vac 2 Manual De Instrucciones

2. Operating and
Please remove all protection materials on Robot and Docking Station before use.
1
Assemble Docking Station
4
Power ON
Note: When Robot completes the cleaning cycle or when the battery gets low, Robot automatically returns to the Docking Station to recharge itself.
Robot can also be sent back to the Docking Station at any time by using the yeedi App or by pressing the AUTO Button on the robot for 3 seconds.
Empty remaining water from the Reservoir and remove the Mopping Pad Plate before charging Robot.
12
EN
Programming/2.2 Preparation
2
Docking Station Placement
m (1
> 0 .5
.6 4 ')
m (1
> 0 .5
5
Charge Robot
4
3
Install Edge Brush
.6 4 ')
> 1 . 5
m ( 4
. 9 2 '
)
Click