Reversing The Door Swing; Tools Required - GE GBE17HYRFS Manual Del Propietario E Instrucciones De Instalación

REVERSING THE DOOR SWING

WARNING
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Tighten all hinge screws but avoid over-tightening
to prevent stripping.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
losing them.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard
doors before lifting.
damage of the cooling system.

TOOLS REQUIRED

Phillips screwdriver
1. Locate the necessary tools and unplug the
appliance.
Refrigerator Door (Upper)
2. Remove the cover on the left side of the faceplate.
49-1000598 Rev. 3
Installation Instructions
to prevent
Pliers
3. Remove the faceplate on the unit.
4. Remove the top plate at the top of the door.
5. Remove the hinge cover.
off of the lower hinge.
down and change the door
stop from the current position
to the opposite side.
11