Beurer BF 980 Instrucciones De Uso página 17

3. The following values will then appear one after the other.
Body mass index (a healthy value is 18.5 – 25)
Body fat percentage (a healthy value is 16 – 28% for women and 11 – 23% for men)
Muscle percentage (a healthy value is 27 – 43% for women and 37 – 57% for men)
Heart rate/pulse in bpm (healthy value: 50 – 100 beats per minute at rest)
Please note that the measurement does not correspond to a defined resting pulse, as measure-
ment takes place whilst standing up and not sitting or lying down. For this reason too, the value
may differ slightly during a repeat measurement.
Note: For more details of the values, please see the app or the FAQs at: www.beurer.com
4. If a Bluetooth or WIFI connection has been established and the user measurements have been successfully
®
taken (e.g. for U: 1), the values will be transferred to the "beurer HealthManager Pro" app. This is indicat-
ed by the measurement data transfer symbol
stored per user. As soon as a connection is established, they are transferred with the next measurements.
5. After measuring the heart rate, step off the scale. The scale switches itself off automatically.
Note: If the automatic scale user detection function is not working, briefly press the scale with your foot, press
the button repeatedly until your scale user is displayed, and wait 3 seconds. Then take the diagnostic
2
measurement.
Note: To display your most recent diagnostic measurement, briefly press the scale with your foot, press the
button repeatedly until your scale user is displayed, and wait 3 seconds. Then press the
2
to display the most recent diagnostic measurement. To display further measurements, press the
again. Up to 30 measurements can be shown on the display
Note: If the measurement is carried out with shoes or socks on, then only the weight is displayed (when the
scale user is recognised, the weight and BMI are displayed and saved).
4.5 ALTERNATIVE METHOD: creating scale users without the app
Alternatively, you can also create a scale user directly on the scale without using the app. This process is
not required if the scale has already been connected to the app.
1. Press and hold the SET button
2. Press the SET button
3. Use the button
tion with the SET button
4. "170" flashes on the display. Use the
5. "30" flashes on the display. Use the
6. flashes on the display. Use the
7. "Act3" flashes on the display. Use the
exercise (considered over the long term). (Act1 = none, Act2 = low, Act3 = medium, Act4 = high, Act5 = very
high/athletic). Confirm with the SET button
8. "End" appears in the display. Confirm with the SET button
9. "0.0" and the user symbol appear on the display. Take the initial measurement.
4.6 Deleting scale users
You can delete individual scale users in the "beurer HealthManager Pro" app.
Alternatively, you can also delete scale users directly on the scale. To do so, proceed as follows:
1. Press and hold the SET button
2. Press the SET button
3. Use the button
4. Press the SET button
5. "dEL" appears on the display. Confirm with the SET button
for 4 seconds. "unit" appears on the display.
5
repeatedly until "on" appears on the display 1.
5
to select the scale user you need (you can select from U: 1 to 8). Confirm your selec-
2
.
5
/
/
/
/
for 4 seconds. "unit" flashes on the display.
5
twice until "USEr" flashes on the display.
5
to select the scale user to be deleted. Confirm your selection with the SET button.
2
repeatedly until "End" appears. Then press the
5
. If the data cannot be transferred, up to 30 values will be
12
.
1
button to set the height. Confirm with the SET button
2 3
button to set the age. Confirm with the SET button
2 3
button to set the gender. Confirm with the SET button
2 3
button to set your activity level based on how much you
2 3
.
5
. The scale user has been created successfully.
5
. The scale user has now been deleted.
5
17
button
button
button within 5 seconds.
2
3
3
.
5
.
5
.
5