Control Panel - Klarstein AEROVITAL JUMBO Manual De Instrucciones

CONTROL PANEL

1 2 3
1 Time/Temp Knob
2 Time/Temp
3 Fan
4 LCD
Time/Temp knob
TIME/TEMP button
Fan button
Lamp button
START/STOP button
MENU knob
4
5 Lamp
6 START/STOP
7 MENU Knob
After selecting the desired menu, press TIME/TEMP button and then turn the
Time/Temp knob to adjust the time and temperature. Turn the Time/Temp knob
clockwise to increase the time or temperature, and counterclockwise to decrease.
After selecting the desired menu, press TIME/TEMP button to enter into the
time-setting mode, and then turn the TIME/TEMP button to adjust the time. After
setting the time, press the TIME/TEMP button again to enter into the temperature-
setting mode, and then turn the Time/Temp knob to set the temperature.
If the function you chosen has fan function, you can press fan button to turn on or
turn off the fan . You can't change fan status in Airfry mode and Dehydrate mode.
After the unit is powered on, press the lamp button to turn on the lamp, and it will
automatically go out after 30 seconds each time. When the program starts, the
lamp will automatically turn on and go out automatically after 30 seconds. When
the program ends, the lamp will automatically turn on and go out automatically
after 30 seconds. When the countdown is 30 seconds, the lamp cannot be turned
off by operating the lamp button.
You can interrupt the working process by pressing the START/STOP button at any
time, and you can adjust the time and temperature in pause status. But Toast
and Bagel setting canot be paused. Press and hold the START/STOP button for
3 seconds to return to the menu selection mode. Press and hold the START/STOP
button for 3 seconds again to turn off the unit.
In standby mode, if you need to turn back to function choosing mode, you can
turn the MENU knob. In the pause state, press and hold the START/STOP button
for 3 seconds to return to the menu selection mode, then you can turn the MENU
knob to choose the function again.
5 6 7
EN
23