Cleaning And Maintenance - SOLAC H101 Instrucciones De Uso

stretched garment, changing the closeness selec-
tor (2) as required.
• After use, turn the fabric shaver off by turning the
switch (1) to the OFF position and, if applicable,
unplug the appliance from the mains.
• After use, and once you have unplugged the ap-
pliance from the mains, we recommend emptying
the lint chamber (4)

CLEANING AND MAINTENANCE

• Before cleaning the fabric shaver, make sure it is
switched off and, if applicable, unplugged from the
mains.
• Remove the lint chamber (4) by sliding it down-
wards, and empty it. The lint chamber must not fill
up more than 3/4 of the way.
• To clean the shaving head, remove the close-
ness adjustment ring (2), sliding it outwards until
it comes free from the unit; remove the shield's
plastic casing using a flat-edged tool and carefully
remove the lint using the supplied brush (3) taking
care not to damage the shaving.
• Clean the plastic casing with a dry cloth.
• Return the blade and the plastic casing to their
original positions.
EN