Kohler Anthem K-28209-NA Instrucciones De Instalación página 3

Specifications
Pressures
Maximum Static Pressure
Maximum Dynamic Pressure
Supply Pressure Differential*
Minimum Flow Rate (less than 72 psi dynamic pressure,
500 kPa maintaining pressure)
Minimum Flow Rate (greater than 72 psi dynamic
pressure, 500 kPa maintaining pressure)
Maximum Flow Rate
This product is for use with showerheads rated at 0.9 gal/min (3.5 l/min) or higher.
Temperatures
Programmable Temperature
Default Temperature at Start-up
Cold Inlet Temperature
Hot Inlet Temperature
Temperature Stability at Recommended Supply Conditions +/- 1.6°F (1°C) at 86°F (30°C) - 118.4°F (48°C)
Ambient Temperature
Maximum Relative Humidity
Electrical
Electrical Rating
*In commercial applications where there is a large difference in hot and cold supply pressures or frequent fluctuation in
either supply line is anticipated, it is strongly recommended that pressure regulators be installed.
Kohler Co.
145 psi, 1000 kPa, 10 bar
125 psi, 860 kPa, 8.6 bar
Max 5 psi, 34 kPa, 0.34 bar (Equal pressures
recommended.)
0.9 gal/min (3.5 l/min)
1.4 gal/min (5.25 l/min)
9.5 gal/min (36 l/min) per outlet, 12 gal/min (45.5 l/min)
total at 45 psi, 310 kPa, 3.1 bar
Max 120°F (49°C), Min 59°F (15°C) Full cold may also be
selected.
100°F (38°C)
34°F (1°C) - 80°F (29°C) and 3.6°F (2°C) below programmed
outlet temperature
120°F (49°C) - 149°F (65°C)
Greater than 34°F (1°C), Max 122°F (50°C)
95% noncondensing
120 V, 1.0 A, 60 Hz
3
1430527-2-A