SBS Studio Mix Solo 2 Stereo Headset Manual De Instrucciones página 4

UK
User Manual
A Adjustable headband
B Multi-function button
C Volume up - Next song
D Volume down - Last track
E Micro usb charging port
F Led indicator
G Microphone
H Usb charging cable
I
3.5 mm audio in
J Fold mode
CHARGE THE HEADPHONES - PIC.2
To charge your head phones, plug the included
usb charging cable into an pc usb (or charger)
port, and the micro usb side into the head
phone plug. The blinking red led means that the
power is low and its time to charge the head
phone. The red led turn off when charging has
been finished.
The headphones has a non-removable lithium-
polymer battery: do not remove, do not dispose
in a fire - may explode. Do not allow battery
leakage to contact with eyes or skin. Do not
expose at temperature higher than 60°. Dispose
of the headphones in accordance with the
applicable laws and regulations in your area.
CONNECTING - PIC.3
Have the 1st device paired
with TTHEADPHONEBTNFCW (SX-987)
a. Long press the MFB multifunction button
for about 7 seconds till the red/blue led
blink alternately
b. Turn on Bluetooth® in 1st device, search
headset SX-987 and have the devices paired.
Have the 2nd device connected with
TTHEADPHONEBTNFCW
a. Long press MFB button till SX-987 is off and
turn off Bluetooth® on 1st device.
b. Turn on Bluetooth® headset SX-987 again.
c. Turn on Bluetooth® in the 2nd mobile phone
and it will search Bluetooth® headset SX-987
automatically.
d. Meantime, turn on Bluetooth® in your
1st device. Click previous pairing record
and connect.
4
All manuals and user guides at all-guides.com
Using TTHEADPHONEBTNFCW
Listen to music and make a call. Play / Pause.
1. Select an audio track or video clip.
2. Tap the MFB to play/pause the audio track
or video clip.
3. Short press the volume up or down to have the
"previous" or "next" song function.
4. Long press the volume keys +/- to adjust volume.
Answer an incoming call
Connect the headphones to a smartphone. Short
press the MFB to end call.
Reject an incoming call
Long press (2 seconds) the MFB.
NFC function
Turn on the NFC function on your smartphone. Put
your smartphone induction zone close to the NFC
headphone zone when is OFF: it will turn on the
headphone. To disconnect the two devices please
put them close again.
Your smartphone may ask you "do you want to
connect SX-987?" or similar: press yes to connect.
Remark: NFC can be connect as long as enable NFC
function on device, even if Bluetooth® function on
device is turn off.
LED indications
Flashing Blue
Slow Flashing Red
Short Flashing Red When you turn off the
Solid Red
No Light
Bluetooth: A connection in
made; your headphones is
ready to use.
The battery is in low power;
Headset disconnected
headphones successfully, the
red LED will short flash and go
off.
Charging and the red LED will
turn off if charging finished.
Your headphones is power off.