Reversing The Door - Polar Refrigeration CE320 Manual De Instrucciones

UK

Reversing the Door

NB: the appliance is delivered with the door opening on the left hand side
1. Remove the upper door hinge cap (1)
2. Using a sharp tool take out the plug buttons (5)
3. Remove the two screws (2) the connect the upper door hinge (3) to the right side of the cabinet top
4. Carefully lift the door and place it on a padded surface to avoid scratching
5. Remove the hinge plug (8) and transfer it to the uncovered hole on the right hand side. Make sure the button is
firmly pressed into the hole
6. Remove the two door hinge bolts (6) that holds the lower door hinge (4) on the right hand side
7. Remove the levelling front leg (7) and transfer it to the right hand side
8. Set the door in its new place and secure the upper door hinge (3) on the left hand side
9. Loosely secure the lower door hinge (4). Do not tighten the holts until the door is closed and levelled
10. Insert the plug buttons (5) into the uncovered holes on the right hand side and replace the upper hinge cap (1)
Operation
1. The thermostatic control is located at the back of the unit. To lower the temperature, turn the knob clockwise.
To increase the temperature turn the knob anti-clockwise.
2. The machine has 5 settings a "1, 2, 3, 4 and 5". Setting "5" is the coldest setting, setting "1" turns of the cooling
system but does not shut of power to the appliance.
3. Adjust thermostat to achieve desired temperature.
4. If the unit is unplugged, power is lost or turned off, you must wait 5 minutes before restarting the appliance. If you
attempt to restart before this time delay, the appliance will not start.
4
All manuals and user guides at all-guides.com
1.
2.
3.
4.
5.
6.
7.
8.
Door Hinge Cap
Phillips screws
Upper Door Hinge
Lower Door Hinge
Plug
Door Hinge Bolts
Leveling Front Leg
Hinge Plug (Door Frame)