Kärcher K 2.26 M Manual De Instrucciones página 8

Vario Power Spray Wand
The Vario Power Spray Wand allows

you to adjust the cleaning pressure.
To clean at maximum pressure, the
wand must be positioned to the high
pressure setting (Max).
For reduced pressure turn the wand
collar in the „Min" direction.
To apply detergent, the wand must
be positioned to the low pressure
setting (Mix).
WORKING WITH
DETERGENTS
Detergents can only be applied at low
pressure.
STEP 1:

Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
STEP 2:

Fill a container with Kärcher deter-
gent. Place the filter end of detergent
siphon tube into the container.
8 English
All manuals and user guides at all-guides.com
STEP 3:

Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 4:

To rinse, move the VPS out of „Mix"
position and pull trigger to operate
unit.
STEP 5:

Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
For best results see Cleaning Tips for
specific information on how to clean
different surfaces.
Always Use Kärcher
Best Results
Kärcher ® biodegradable detergents are
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Kärcher ® Detergents, check
your retailer or visit our website:
www.buykarcher.com
CAUTION
Never use:
Bleach, Chlorine products and other
–
corrosive chemicals
Liquids containing solvents (i.e.,
–
paint thinners, gasoline, oils)
Tri-sodium phosphate products
–
Ammonia products
–
Acid-based products
–
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
® Detergent for