Positioning The Unit - ProBreeze PB-15 Manual De Instrucciones

Ocultar thumbs Ver también para PB-15:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
ACCESSORIES
― ―
The following accessories can be found in
the water tank. Remove and install before
use (as per instructions listed below).
Female threaded end
power cord buckle

POSITIONING THE UNIT

This unit is designed to operate in
temperatures between 5ºc and 32ºc,
and between a 30% and 50% RH
(relative humidity).
Place the unit in an area where the
temperature will not fall below 5ºc.
In temperatures below 5ºc, the coils
may freeze; leading to a reduction in
performance.
Place the unit on a smooth, level
surface, strong enough to support the
unit with a full water tank.
Allow at least 50cm of space behind
the air outlet (at the back of the unit) for
good air circulation. Allow at least 20cm
of space on all other sides of the unit for
good air circulation.
Place the unit away from a clothes dryer,
heater or radiator.
For best results, place the unit in an
enclosed space and close all doors
windows and outside openings.
If placed near an enclosed storage area
(like a wardrobe or cupboard), ensure
there is adequate circulation of air.
Do not use outdoors.
5 | English
continuous drainage
hose
To install the power cord buckle, simply
insert into the back of the unit
This unit is intended for indoor
residential use only. It should not be
used for commercial or industrial
applications.
There are four wheels attached to the
unit for ease of transportation. Do not
force the castors to move over carpet.
Do not transport the unit with water
in the water tank. This may cause the
unit to tip over or the water to spill.
40cm +
20cm +
40cm +
20cm +
20cm +

Publicidad

Tabla de contenido
loading

Tabla de contenido