Emptying The Water Tank - ProBreeze PB-15 Manual De Instrucciones

Ocultar thumbs Ver también para PB-15:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50

EMPTYING THE WATER TANK

― ―
Caution
Always turn the unit off and remove
the plug from the wall outlet before
removing the water tank.
Do not transport the unit with water in
the water tank. This may cause the unit
to tip over or the water to spill.
Be careful when removing the water tank
from the unit to avoid spilling water.
When you remove the water tank, do not
touch any parts inside the unit. Doing so
may damage the product.
If there is water anywhere else in the unit
when the water tank is removed, clean
with a dry cloth.
Once connected, you can view
performance and control your
dehumidifier through the app.
Instructions
If the unit is on and the water tank is full,
the compressor and fan will turn off and
the "full" light will illuminate.
To empty the water tank, slowly pull it
out a little to loosen.
Hold both sides of the water tank with
two hands, and even strength, and
pull it from the unit. Do not put the
water tank on the floor as the base is
uneven.
Throw the water away in a safe place
and replace the water tank. Ensure this
is done gently, all the way into the unit,
as forcing the water tank in may cause
damage.
English | 8

Publicidad

Tabla de contenido
loading

Tabla de contenido