Measurement With The Desired Systolic Pressure - A&D Medical UA-651BLE Manual De Instrucciones

Taking your Blood Pressure

Measurement with the Desired Systolic Pressure

If re-inflation occurs repeatedly, use the following methods. If your
systolic pressure is expected to exceed
230 mmHg, use this procedure.
1. Place the cuff on the arm at heart
level (preferably the left arm).
2. Press the START button.
3. During the zero blinks, press and hold
the START button until a number
about 30 to 40 mmHg higher than
your expected systolic pressure
appears.
4. When the desired number is reached,
release the START button to start
measurement. Then continue to
measure your blood pressure as
described on the section "Normal
Measurement".
E-19
At heart level
Press the
START button
All of the display
segments displayed
Press and hold the
START button
Inflation in progress
Release the START
button to stop inflation
Desired pressure
Refer to the section
"Normal Measurement"