Rf Connection - Ferroli CRP ZONE Manual Del Usuario

6. RF connecTIon

when the batteries are inserted, pairing and communication with the gateway status is checked.
fig. 12
For the first few seconds all the symbols on the display are activated, then the thermostat version is displayed.
If the thermostat is not paired with a gateway, the icon
blinks and only the detected room temperature is
shown on the display.
to pair the RF device with a gateway, see par. "6.1 RF
pairing with gateway (Pairing)" on page 70.
fig. 13
69
cod. 3542B150 - Rev 02 - 04/2022
EN